The still is excellent for bourbon, whiskey, brandy, grappa, rum and many other spirits where a long contact of alcohol vapors with copper is required during distillation. The column can be run in both Pot Still mode and its standard “double distillation” mode, allowing you to produce high quality product in just one run.
The copper plates of the still are equipped with bubbling caps, better known as “procup”. Due to the absence of a classic drain baffle in the design, it was possible to increase the surface area of the phase contact in the bubbling layer up to 20%.
In addition, the column shows excellent results when launched in a wide range of operating steam speeds, which is important for obtaining beverages from fundamentally different raw materials, such as grape, fruit or grain must.
Feature
Column specifications
The productivity of the column depends on the required quality and strength of the drink, the composition of the mash entering the distillation.
| MCF-020 | |
| Distillate, % vol. | 65…85 |
|---|---|
| Heat power, max, kW | 3 |
| Diameter, inch | 2 |
| Recommended boiler, liter | 25…40 |
| Total height, mm | 700 |
modifications
Column options
| Column diameter |
|---|
| 020 two inches |
| 030 three inches |
| 040 four inches |
Complete kit
Column set
| Pot still Maximus: – 2″ condenser SS304; – 2″ 90° bend SS304; – 2″ 90° bend with nippel SS304; – 2″ spout SS304; |
1 set |
| Bubble column: – 2″ dephlegmator SS304; – 2″ bubble section – 4 pcs.; – 2″ copper plates – 4 pcs.; – copper bubble caps – 4 pcs. |
1 set |
| Tri-Clamp: – 2″ silicone gasket; – 2″ tri-clamp. |
9 pcs. |
| Accessories: – hose PU – 4 meters; – union Y-shaped push-in fitting – 2 pcs.; – elbow push-in with throttle check valve – 2 pcs.; – straight push-in fitting – 2 pcs. |
1 set. |
| Gauges: – digital thermometer. |
1 pcs. |
consulting
Ask an expert